PA01 - Hook terminal connector (M6)

Part Number: 700513

 

This connector is the ideal solution if your battery is difficult to access, hidden or if you cannot use clamps. Just connect the hook terminals to the battery and charge normally. This accessory is compatible with all BS Chargers and any chargers equipped with SAE plug.

Thanks to the hook-shaped terminal eyelet, there is no need to fully remove the terminal screw. Simply loosen the screw, slide the hook eyelet into place, and tighten.

 

FEATURES

2 x M6 hooks(1/4").

Integrated fuse protection.

Wire 61 cm (24.00")/ 0.82mm² (18AWG).

Safe: connection spark free, reverse polarity, short circuit and internal overheat protection.

 

INSTRUCTIONS

  Unscrew a few turns of two screws on the battery (not completely unscrew) first. 

Connect red hook on positive battery terminal (+).  Hook terminal can be put under the screw, and the crew it up tight. 

Connect black hook on negative battery terminal (-).  Hook terminal can be put under the screw, and the crew it up tight. 

Connect the SAE connection of this accessory to the SAE connection of your charger.